As it can’t officially support features. It’s possible a future update will erase the ability to listen to audio over Bluetooth.
Connect Nintendo Switch To Wireless Earphones
The steps for connecting a wireless headset to the Nintendo Switch based on whether you are using the Switch while docked or else using it unplugged from the docking station.
As it is docked, connect the USB dongle into the USB ports on the dockside. The Nintendo Switch can recognize the device and you will then view a prompt on the upper-left corner of the screen displaying a USB volume control.
The Switch itself has a single USB port, and it is a USB-C port under the device. If you like to move fully wireless, you want a USB-to-USB-C connector.
- Connect the USB-to-USB-C connector into the USB-C port under the Nintendo Switch.
- Plug the USB dongle for your wireless headset into the connector.
It takes a few seconds for audio to transmit whether docked or not docked.
List of Verified Headsets That Work Well With the Nintendo Switch
The major requirement is to use a Bluetooth headset that comes with a USB dongle built to be plugged into a PC or gaming console. Not all wireless headsets meet this requirement can work.
If you have one of these headsets, you probably try it out to view if it works. After all, you don’t need anything to lose. But if you are trying to buy one to use with the Switch, remember you buy one on this list:
- Creative Sound Blaster Tactic3D Rage
- Creative Wireless HS-1200
- Logitech G930
- Logitech G933
- Turtle Beach Ear Force Stealth 500P
- Logitech H800
- LucidSound LS30 (with the optical cable plugged into wireless dongle)
- LucidSound LS40 (Needs optical cable plugged into wireless dongle)
- PDP Legendary Sound of Justice
- Plantronics Audio 510
- Turtle Beach Ear Force PX3
- PlayStation Gold Wireless Stereo Headset
- PlayStation Platinum Wireless Headset
- Turtle Beach Ear Force Stealth 450
- PlayStation 3 Wireless Headset
- Skullcandy PLYR 1
- SteelSeries Arctis 7 (with 3.5 mm 3-pole cable)
- Steelseries Siberia 840
- Turtle Beach Ear Force P11
- Turtle Beach Ear Force Stealth 700
- Steelseries Siberia 800
Well, these headset work with a quite different setup:
- LucidSound LS30 or LS40. These headsets need an optical cable to be connected to the dongle.
- SteelSeries Arctis 7. However, the headset wants a 3.5mm 3-pole cable that is not added with the headset.
What Happen If Your Headset Stop Working?
If you have issues with audio, initially you should do is consult the list above and make sure that your headset is listed.
If your headset is on the verified list and you have an issue, try the following:
Initially, ensure the headset is charged properly.
If you have another device that works with the headset like a PC or another gaming system. Simply hooks it up to that system. This step checks the headset is in working condition.
After using it in undocked mode. Simply try to use it with the Nintendo Switch docked. If this works, you might have an issue with the USB-to-USB-C connector.
However, if the Switch is docked and the headset USB dongle plugged into one of the USB ports on the side, try switching ports. Not only there are two ports on the side. There is one hidden in the back. If you want to access this one, head over the lid on the back of the dock. This is the area with the power and HDMI cables. Between these two ports, there is a 3rd USB port.
Here’s all about “Connect Nintendo Switch To Bluetooth”. Whatever the given methods you used, you can easily connect the Nintendo Switch to Bluetooth. If you want to share any other thing regarding the article then let us know below. For further queries and questions let us know in the comment section below!