Apple Tips & Tricks

How to Get Water Out of iPhone Speakers

Most of the newer iPhones are water-resistant, however, Apple does not offer a method in order to get water out from your iPhone. Weirdly, Apple Watch basically comes along with that water ejection feature and even Samsung’s Galaxy Watch too. If you guys have accidentally dropped the iPhone in the pool or shower. Then you might have noticed that the water that gets in the speaker grills. And it leads to muffled audio for some time until the water leaves the speaker grill actually. In this article, we are going to talk about How to Get Water Out of iPhone Speakers. Let’s begin!

Does Rice really works or not?

One of the most famous ways to get water out of the iPhone speaker is basically to put it in a bag of rice for 24 hours. Yes, rice does help in order to absorb moisture on your iPhone, however, this process is slow and takes the whole day. Fortunately, there are many easier and faster methods that can get water out of the iPhone. Let’s now check them out.

Before we begin | how to get water out of iPhone speakers

Most of the iPhones released after the iPhone 7 are splash, water, and dust resistant actually. Also, according to Apple, water resistance is not permanent actually and resistance might decrease as a result of normal wear. Additionally, it is not covered under any kind of warranty. Let’s have a look at the list.

  • iPhone 6 and older – no water resistance
  • iPhone 7 and 7 Plus- IP67
  • iPhone 8 and 8 Plus – IP67
  • iPhone X and XR- IP67
  • iPhone Xs and Xs Max- IP68
  • iPhone 11, 11 Pro, and 11 Pro Max- IP68
  • iPhone SE 2020- IP68
  • iPhone 12 Mini, 12, 12 Pro, and 12 Pro Max- IP68
Further | how to get water out of iphone speakers

Here IP68 under IEC normal 60529 means, your phone can also withhold a maximum depth of 2 meters for more than 30 minutes. However, IP67 means, it can hold a maximum depth of 1 meter for more than 30 minutes. But, there are two exceptions actually, where the iPhones have an IP68 rating. However, offer water resistance for different depths. iPhone SE 2020 only claims a water resistance for more than 1meter for 30 minutes. And the iPhone 12 series actually offers water resistance for more than 6 meters for 30 minutes.

All of the methods mentioned below, use a sound frequency that basically pushes the water molecules trapped between the speaker and the grill of the iPhone actually. You guys can use any of these methods along with the same success rate.

How to get Water Out of iPhone Speakers

If you guys drop your iPhone in the pool or shower, wipe it along with a clean cloth. If you guys accidentally spill any other liquid such as tea, coffee, etc. Then make sure you rinse it first under fresh cold water, however, make sure the water pressure isn’t that high. Then clear it along with a clean cloth and also make sure you do not charge your device until it is completely dry. Since there might be some liquid in the lightning port that has not evaporated completely as well.

Use an App

However, shortcuts are great, they are also unregulated to a certain degree actually. Anyone can also create and share a shortcut, regardless of content or execution. Additionally, you also need the Shortcuts app to use it. If you guys don’t plan on making or through any other shortcuts. Then it might be better to just install a water-ejecting app. This way, you guys also get some peace of mind knowing that it is met Apple’s rigorous App Store standards as well.

How to Get Water Out of iPhone Speakers

This first method is actually completely manual. We are now going to use a simple app in order to play a low-frequency sound. That would agitate the water droplets trapped in the water grill enough so that the water can also drip out of the iPhone. Power on your iPhone if you guys have not done it already. You have to download the Sonic app from the App Store. When the download put the iPhone on a flat surface and just open the app. Swipe up and down the app in order to set a frequency. Well, ideally, it should be between 100-200 Hz, and click on the ‘Play’ button.


You guys will see little drops of water coming out of the speaker grills, and let the app run for a few seconds. And then just take a clean cloth and clean the speaker grill. Now repeat the process many times unless you see no more water coming out. You can play an audio or a video on your iPhone in order to confirm if the sounds feel natural then you’re all done.

But, the caveat of using this method is that the frequency is monotonous and it might not be sufficient in expelling the water droplets fully. That’s why the other two methods are actually more efficient. Because it uses a rapid sound burst to expel the water droplets instantly.

How to Get Water out of iPhone Speakers With Siri Shortcuts

If you guys have Siri Shortcuts installed on your iPhone, then you can try a shortcut called Water Eject. It actually works on the same principle as the Sonic app. That plays a sound that forces the water out of the speaker grill quickly. Let’s see how it works actually.

You have to install the Shortcuts app from the App Store, if you haven’t already. When downloaded, then just install Water Eject through the link above. When the shortcut is installed, then simply run it from the Shortcuts app through clicking the shortcut icon.

It would play a sound frequency that may not be audible to your ears, however, it should start spitting out water from the grills actually. After you do that, simply play an audio file in order to confirm that the speaker has returned to its normal sound actually.

Via a Website

How to Get Water Out of iPhone Speakers

Another pretty easy way to get water out of your iPhone is to visit The website is really simple and it just does one thing. It basically gets water out of the speakers. Just simply tap the big and only button on the webpage in order to initiate a sound sequence. You guys can press the button again to stop the sound. When the water stops spitting out the speaker grills actually.


Alright, That was all Folks! I hope you guys like this “how to get water out of iPhone speakers” article and also find it helpful to you. Give us your feedback on it. Also if you guys have further queries and issues related to this article. Then let us know in the comments section below. We will get back to you shortly.

Have a Great Day!

Also See: Bypassing Chromecast DNS and Blocking Google DNS

About the author

Windy Moore

Leave a Reply