Install Odin Flash Tool: Odin Tool aka Samsung Flash Tool allows users to flash firmware, recovery, and custom ROMs on their Galaxy devices. So, If you like to flash the Stock ROM/Firmware on your Samsung smartphone then you need to install Odin. However, Odin is a flash tool for Galaxy Android devices like Samsung Galaxy A50, J7, A70, J7 Prime, S9, S10, Note 10, etc. Here you can Download Odin Flash Tool to flash Samsung Firmware. In this guide, you’ll also get to know how to use the Odin tool on Windows.
Odin flash tool is also available for Windows platform, It means it works on Windows 7, 8 and 10. So to use Odin the use of PC is important. But once you have installed TWRP on Galaxy devices using Odin then you don’t have to use Odin again and again. However, Odin can be used to resolve boot loop problems any other issues on Samsung devices.
Windows WP, 7, 8 & 10
What is Odin?
Odin aka Odin3 aka Odin Tool is a Galaxy flash tool that is needed for any system modifications like installing custom recoveries, flashing stock firmware, flashing custom ROMs and rooting Galaxy Android phones. So if you like to perform any of these tasks on a Galaxy phone then you have to use Odin.
Also, Odin works with Galaxy devices. However, to use Odin there are some requirements or the important steps to perform before using Odin which you will know later in this post. Let’s come and take a look at the download section.
Download & Install Odin Flash Tool
Odin Flash Tool is a very essential tool for flashing the Galaxy phones. So, To Install Odin Tool on your PC, you can select a specific version from the links given below. Here you will get also get the latest Odin download links to date including older versions.
You can select any particular version and install the Odin tool for PC. You can also flash the devices like Galaxy S10, Note 8/9/10, Galaxy A20,30,50, and all other Samsung Galaxy devices.
- Firstly, download the latest version of Samsung USB Drivers to connect Samsung device to your computer.
- Also, enable developer option on your Android.
- The Odin tool also works on Windows XP, Windows 7/8/8.1, Vista and Windows 10.
- Download SamFirm to install official Samsung Firmwares for any Samsung smartphone. Here are the latest SamFirm Tools:
- Before flashing, remember to check that the phone is charged at least 30%.
How to Install Odin
After installing the supported version of the Odin Tool for your computer, then follow the steps to use it. Simply run the Odin.exe file.
Firstly, extract the Zip file using a zip opener like WinRAR.
Also, open the extracted folder.
Once you open it, you will find the ‘Odin.exe‘ file.
Just double-tap on the exe file and run it.
Then run it as an administrator which is recommended.
That’s all! You can now use the Galaxy flash tool for any task supported by it.
How to Use Odin Flash Tool
After installing Odin Flash Tool, just take a full backup of your smartphone before installing any firmware or custom ROM on Samsung devices.
Firstly, download the firmware file for your device from any source.
Now extract the installed firmware file.
In the tool tap on BL and load BL file. Same as for CP, AP, and CSC. You may also have to wait for loading files.
Switch off your phone and then press and hold Vol down+power+home button simultaneously and boot into Downloading mode. Hit volume up if it displays a warning.
Also, connect the device via USB cable. In the log file ‘added’ message will display.
Now tap on start. It takes a few minutes, so wait for completion.
At last, it will provide a successful message and the phone will automatically boot into the system.
That’s all for the Odin Flash Tool. However, it is the only flasher which enables users to flash stock firmware on the Galaxy phones. To take full benefit of Odin simply Download Odin and begin flashing files.
Here’s all about the ‘Odin Flash Tool’. For further queries and questions let us know in the comment section below!