Root & Recovery

How to Root Galaxy S6 on Android 5.1.1 – All variants

Been restlessly sitting tight for a working root method for your Galaxy S6 running on Android 5.1.1? Indeed, there’s some uplifting news. Root has at last been accomplished on Android 5.1.1 forms for all variations of the Galaxy S6.

This is a joined exertion from XDA clients g.lewarne, mikeyinid (for making a custom kernel) and bigbiff (for 5.1.1 compatible TWRP recovery). The 5.1.1 based custom kernel from g.lewarne incorporates auto-root, so simply blazing it by means of TWRP carries out the responsibility.

However, this may not chip away at the Galaxy S6 edge variations. The TWRP recovery should be changed for the edge variation, and until TWRP works, you can’t streak the custom kernel’s .compress record to your S6 edge. Try not to be tragic, however, this ought to be dealt with soon and either an edge compatible TWRP recovery or Odin flashable kernel ought to be accessible soon for rooting Galaxy S6 edge on Android 5.1.1.

For the Galaxy S6, g.lewarne’s custom kernel with auto-root is all inclusive, so it’ll chip away at all variations of Galaxy S6 — G920F, G920I, G920T (T-Mobile), G920S, G920K, G920L, and G920W8.

Snatch the Android 5.1.1 compatible TWRP recovery and g.lewarne custom kernel with auto-root from the download connects underneath and after that adhere to the directions to root your Galaxy S6.

It might interest you: How to Flash SuperSU using TWRP recovery and Root any Android device [v2.82 SR5]

Method 1: Root Galaxy S6 on Android 5.1.1 by means of ODIN

Downloads:

Tutorial:

Step 1: Open Odin 3.10.6 on your PC.

Step 2: Boot your Galaxy S6 into Download mode:

Step 3: Turn off your tablet.

Step 4: Press and hold “Home + Power + Volume down” buttons for a couple of moments until you see a notification screen.

Step 5: Press Volume Up on the notice screen to acknowledge it and boot into Download mode.

Step 6: When your S6 is in download mode, interface it to the PC with a USB link. The Odin window on PC ought to distinguish the telephone and show an “Additional!!” message.

Step 7: Now click on the AP button on Odin window and select the S6_UniKernel_v2-0003-ODIN.tar record that you downloaded previously.

Step 8: Snap the Start button on Odin and sit tight for it to complete the procedure. When it has completed effectively, you’ll see a pass message on the Odin screen.

Your device will automatically reboot when Odin is finished blazing. You should now have root get to, search for the SuperSU application in your application cabinet. Likewise, download and introduce this root checker application from Play Store to confirm root get to.

Method 2: Root Galaxy S6 on Android 5.1.1 by means of TWRP Recovery

Downloads:

Tutorial:

We’ll be installing the 5.1.1 TWRP recovery first by means of Odin and afterwards streak the custom kernel with auto-root by means of TWRP recovery.

NOTE: This guide is just for Galaxy S6 running on Android 5.1.1. 

Install Android 5.1.1 TWRP Recovery

Step 1: Open Odin 3.10.6 on your PC.

Step 2: Boot your Galaxy S6 into Download mode:

Step 3: Turn off your tablet.

Step 4: Press and hold “Home + Power + Volume down” buttons for a couple of moments until you see a notification screen.

Step 5: Press Volume Up on the notice screen to acknowledge it and boot into Download mode.

Step 6: When your S6 is in download mode, interface it to the PC with a USB link. The Odin window on PC ought to recognize the telephone and show an “Additional!!” message.

Step 7: Now click on the AP button on Odin window and select the twrp-2.8.7.1-zeroflte.img.tar document that you downloaded previously.

Step 8: Snap the Start button on Odin and sit tight for it to complete the procedure. When it has completed effectively, you’ll see a pass message on the Odin screen.

Step 9: Your device will automatically reboot when Odin is finished installing.

Flash Custom Kernel with auto-root by means of TWRP Recovery

Step 1: Download and exchange g.lewarne’s custom kernel with auto-root to your Galaxy S6.

Step 2: Boot your Galaxy S6 into TWRP recovery:

Step 3: Power off your Galaxy S6.

Step 4: Press and hold “Volume UP + Power + Home” buttons together and when you see the Galaxy S6 logo on screen, discharge all the three buttons. This will boot you into TWRP recovery.

Step 5: Tap Install on the TWRP recovery principle menu and select the custom kernel compress record that we exchanged to your telephone in Step 1.

Step 6: Install the custom kernel and after that just reboot your S6. You DON’T have to wipe anything.

That’s it in a nutshell. Upon boot, search for the SuperSU application in your application cabinet. Likewise, download and introduce this root checker application from Play Store to confirm root get to.

About the author

Huda Zaidi

Leave a Reply